The Jensen Stereo part # JWM60A will work great as a replacement for your AWM960 but the connectors are not the same and there isn't a plug and play adapter. You'd have to wire your RV's wiring to the new stereo using the diagram I attached as a guide. view full answer...
We don't have a steering stabilizer from any of our manufacturers confirmed to fit your 2008 Winnebago Outlook Motorhome. I can't confirm a fit, but based on your photo, you may be interested in the Replacement Steering Stabilizer Shock for Demco Kar Kaddy Tow Dolly # DM01729-30. This part has a 9/16-inch eyelet at each end. When fully retracted the hole centers are 14-inches apart; when fully extended they are 24-inches apart on center.
If you want to look at the heavier duty options... view full answer...
From what I understand from your question, you are needing a replacemet tail light for a Demco Kar Kaddy 260. We have that in Replacement 4-1/2" Round Tail Light for Demco Kar Kaddy Tow Dolly, # DM35MV. This replaces the 4-1/2" round, enclosed tail light for Demco Kar Kaddy tow dolly models KK260 or KK360. view full answer...
For a steering stabilizer that is a confirmed fit on your 2019 Winnebago Outlook 27D use the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets # RM47MR. view full answer...
The LED Light Strip for Thule RV Awnings part # TH301660 is 8mm wide and the LED Light Strip for Thule RV Awnings part # TH307135 is 12mm wide but that is the only difference. view full answer...
The fit guide you are referencing is for the exterior. The frame and electrical components are for the chassis which is a 2010 Ford Van Chassis for the E-450.
My guess is you are looking for anti-sway stabilization bars. These help reduce body roll and help you maintain control with crosswinds, passing traffic, uneven lanes, etc. I recommend the following parts confirmed to fit your chassis:
Roadmaster Rear Anti-Sway Bar for Motor Homes # RM-1139-147
Roadmaster Front Anti-Sway Bar... view full answer...
The Camco RV Rain Gutter Extensions # CAM42110 that you referenced are exactly what you are looking for as these are designed to divert the water away from the body of the RV so that it doesn't run down the side of it and cause black marks. view full answer...
For your Better Bath Single Bowl RV Kitchen Sink - 27" Long x 16" Wide - Stainless Steel # LC385313 I recommend the Valterra Sink Drain with Strainer Basket # A01-2011VP. It works with standard 2-1/8" diameter sink drain holes and fits 1-1/2" P-traps. view full answer...
There isn't a part number for the feet (or grommets) because they are not sold as replacement parts for the Camco RV Universal Fit Stovetop Silencer and Countertop # CAM43571.
So there isn't anything designed specifically as replacements for this cutting board, but if you don't want to buy a new one, what may work are the Camco Magic Chef Stove Grommets # CAM43614.
They are for a Magic Chef grate but could work out for what you need, and would be the closest that is available to replacements... view full answer...
I have another option for you, but roof vents are only 14" x 14", and we do not have any smaller covers.
If you can tell me what the model number of your roof vent is I would be happy to confirm the correct replacement roof vent lid for you, or you can use the MaxxAir UniMaxx Universal Replacement Lid # MA00-335001 in white or # MA00-335002 in smoke.
Both options mentioned are universal and use a universal hinge that gets screwed to your existing roof vent so they will work with any roof... view full answer...
Hey Leo, the Camco UltraGuard RV cover part # CAM45745 that you referenced is a fit for your 2008 Winnebago Outlook Class C that is 30 foot long. When these covers are fit they are designed to have the standard roof accessories like AC units and ladders taken into account so you do not need to add in any additional length to the cover fit. view full answer...
The difference is that the part # LC3747453 comes with the Adapter/Harness # LC369413 and the Switch Magnet # LC369299 while part # LC3747452 does not. Aside from that these are the same step. view full answer...
The only hold downs we have available are the RV Day/Night Shade Hold Downs # 37281735 which are clear. I checked with JR Products and this is the only color that they offer.
Attached is a review video that you can check out. view full answer...
Standard incandescent "bulb" lights are not polarity sensitive as some LED lights are so when installing Optronics Incandescent Trailer Clearance Light # MC32RBB it does not matter which pigtail lead you connect to ground or hot. view full answer...